Boss Laser 6012-EXT Front Closed - Fiber Metal Laser Cutter
Move your mouse over image or click to enlarge
Boss Laser 6012-EXT Front Closed - Fiber Metal Laser Cutter Boss Laser 6012-EXT Fiber Metal Laser Cutter Boss Laser 6012-EXT Front Closed - Fiber Metal Laser Cutter Boss Laser 6012-EXT Rear View Fiber Metal Laser Cutter Boss Laser 6012-EXT Top View Fiber Metal Laser Cutter

FC-6012 EXT Fiber Laser Cutting Machine

BOSS’ FC-6012 EXT fiber laser cutter improves upon the Elite with a fully enclosed work area plus an exchange table. Choose up to 15KW of fiber power and laser cut stainless, carbon steel, brass, copper, titanium and other non-ferrous metals. Cut up to 20mm carbon steel. Includes U.S.A. Made IPG fiber power source, onsite installation and training, and a two (2) year warranty. Save up to $20,000 by talking to a sales rep!

Josh is the technician that saved our busy... Kaitlynn
Josh is the technician that saved our busy season! Our experience with our technology maintenance visit was amazing. Josh walked us through everything we didn't know that we didn't know about our equipment and helped us by getting our lasers back into tip-top shape.

Features

IPG-1KW Fiber Power:

-Upgrades from 2KW-15KW IPG
-Wavelength 1.07 μm
-Multi-Mode Beam Quality
-Water-cooled Industrial Performance
-Direct Modulation up to 50 kHz
-High Reliability with 2-Year Warranty

Advanced Sigma 7™ YASKAWA Servo Motors & Drivers

Y axis dual drive

X single drive
Yaskawa’s Sigma7TM servo series was designed to maximize responsiveness in applications where precise load matching is of critical importance. This
family of brushless servo motors was created with low capacity applications in mind, yet can respond with rated speeds to 3000 rpm
and torque ratings up to 2.39 N-m (21 in-lb) when an application requires it. 24-bit encoder resolution maintains industry-leading positional accuracy
in any operating condition.

Atlanta Helical Gear Racks From Atlanta Drive Systems™

Made in Germany with a branch here in New Jersey, Atlanta Drive Systems gives BOSS’ FC Elite fiber cutter high precision helical gear racks.  With minimal pitch error over the entire travel length the high precision parallelism allows for drives with extremely low backlash without the need for preloading.

Aviation Grade 6061-T6 Aluminum Gantry

Manufactured to aerospace standards to 6061 T6 – hardened aluminum alloy.  T6 temper 6061 aluminum is treated to provide the maximum precipitation hardening (therefore yielding maxium strength).    Aviation aluminum has many advantages beyond strength including light weight, corrosion resistant, low density, all of which contribute ot improved processing speeds.

Fiber Laser Cutting Head - Swiss Engineered

Premium fiber laser head suitable for medium and higher power fiber lasers in industrial applications. Includes a new dust-proof design that
eliminates collimation lens contamination.   Also, a top protective window was added to the collimation assembly as well as the bottom protective
window structure is also fully upgraded with protection.  This double protection design enhances the user experience by practically eliminating
any lens contamination risk.

Head Features:

• Optimized optical configuration offers a smooth and  efficient airflow design

• Improved anti-collision function prevents damaging the laser head

• Turntable focus adjustment with range of 20mm, accuracy – 0.05mm

• Collimation lens, focusing lens, and nozzle equipped with cooling structures

Convenient FC Machine Mounted Monitor & Windows 10 PC

Machine mounted and adjustable Monitor connected to Windows 10 PC.  Includes CYP-CUT laser interface pre-installed.

Critical Transmission Components: Helical Gear Rack & Pinion With...

The main and critical components to the drive transmission include: Helical Gear Rack & Pinion transmission supported on 20mm Hiwinn Rails & Bearing Blocks.  Yaskawa Sigma7TM servo motors and drivers coupled with Neutgart inline gear reduction enables the FC Pro to achieve +/- .02mm positioning accuracy.

 

Have more questions?  Feel free to give one of our laser experts a call.  We’re here to help? 407.988.2420

CypCUT Laser Cutting Control Software

Designed for laser cutting CypCUT is a popular and robust software for industrial fiber laser systems.  It includes control card, breakout board with a wireless remote along with a  free standing capacitive height adjustor.  On the VIDEOS tab you can view the nesting utility.

 

NOTE: All FC series laser purchases include a minimum of 2 days install and training of which operators will be able to understand CypCUT functionality.

Designed & Engineered In USA By Boss Laser

As we continue to design, engineer, and assemble our laser systems here at Boss we have expanded our facilities to 43,000 sq. ft.  We continue to build in-house as well.  We strive to improve our quality output by upholding our IS0-9001:2015 certifcation. We are also members of BBB, D&B, System for Award Management (SAM), and Laser Institute of America (LIA).  See a laser Live! Come and visit us in Sanford, FL just 20 min North of Orlando.

Fiber Laser Cut Steel With Precision Up To 20mm Thick For Carbon Steel With 3KW

Fiber Laser Cut with Precision up to 20mm thick for Carbon Steel using 3KW IPG power.  More power will obviously improve upon that as well as the speed.  Have questions?  Give one of our fiber laser experts a call: 407-988-2420.

Independent Temp Control Cabinet

The thermostat controlled cabinet protects the electrical components and IPG laser source from dust and heat for increased longevity.

Industrial Fiber Laser Chiller

Our dual temperature water chiller provides  4200 watts of cooling capacity.  Designed for cooling 1000W fiber lasers they are include both a dual circulating refrigeration and dual temperature control systems.

 

  • Voltage:220V
  • Frequency:50/60Hz
  • Refrigerant:R-410a
  • Reducer:capillary
  • Pump Power:0.55KW
  • Tank Capacity:15L
  • Inlet And Outlet:Rp1/2+Rp1/2
  • N.W:67Kgs
  • G.W:77Kgs
  • Dimension:70*47*89(L*W*H)
  • Package Dimension:74*61*104(L*W*H)
Neugart™ Planetary GearBox

NeugartTM  gearboxes offer an ideal combination of precision planetary gearbox and efficient bearing technology. It has been developed specifically for delivering the maximum performance at high speeds. Its helical teeth provide homogeneous synchronism and quiet running noise.

On-Site - *THREE (3) Days Installation & Training Included*

Let’s get your team producing quickly and efficiently!  Boss’ EXT cutters include Three (3) Days of On-Site Installation & Training.  We cover the most important
items from machine safety, set-up, maintenance, basic software functions, and if time permits any new job you want to be setup for.

Quality Management System (QMS) - ISO-9001 CERTIFIED

ISO 9001 is the International Standard for a quality management system (“QMS”).  In order for our company to be third party certified to the ISO 9001 standard, we had to follow the requirements set forth within the Standard. ISO 9001 evaluates whether our QMS is first appropriate and effective, and then forces us to identify and implement improvements.

 

In short the standard demonstrates our ability to consistently provide products and services that meet customer and regulatory requirements and to demonstrate continuous improvement.  The current version is ISO 9001:2015, which was published in September of 2015 (thus the: 2015).

Tech Support For Life Via. BOSS' In-House Laser Tech's And Engineers

Our In-House Tech Support team is here to serve and support from the day you receive your BOSS Laser and for as long as you own the machine.   Our tech support utilizes video, help manuals, phone, email, remote support via. Team Viewer, FaceTime, and even on-site support if necessary.   Need on-site installation and training for your team? Give us a call we’re here to help!

Warehoused Replacement Parts & Accessories For Quick Replacement

Having supported thousands of businesses, hobbyists, educational, military, and Government institutions we know and understand how critical it is to be able to deliver competant and timely support.  Quality support begins with warehousing ALL parts to the machine you purchase – in our facilites.  That way if you have an issue with your laser cutter we can not only diagnose the problem we can also ship you the part you need same or next day.  This way you experience minimal down time.

Warranty - 2 Year Parts Includes Fiber Laser

Boss’ fiber laser power warranty is two (2) years covers all parts including the fiber laser source.  Have questions?  We’re here to help:  407-988-2420.

We 100% Guarantee With Our 30-Day Guarantee Return Policy

What about Boss’ return policy?  You have thirty (30) full days to test drive your BOSS LASER machine for yourself.  Engrave, cut, and prove it for yourself!  We Guarantee a quality machine backed by quality support!  See details here:  BOSS Guarantee & Warantee Policy

Specs

Cutting area

  • 59 X 118" OR 1,500MM X 3,000MM

Fiber Power

  • IPG FIBER 1KW, 2KW, 3KW, 4KW, 6KW OR 15KW

Software Interface

  • CYPCUT PLANE CUTTING SOFTWARE

Machine Dimensions

  • 180"L X 96"W X 82"H OR 315"L X 120"W X 74"H

Motor type

  • AC SERVO MOTORS

Z-drive

  • BALL SCREW W/ 3" MOVEMENT

Material platform

  • SAW TOOTH BLADE CUTTING PLATFORM FOR METAL CUTTING

Laser Cooling

  • DUAL TEMP 4200W CHILLER

Net Weight

  • 30,000 LBS.

Gross Weight

  • 10,000 LBS

Power Supply

  • CALL FOR INFO

Class

  • Class 4 laser

Warranty

  • TWO (2) YEARS PARTS WARRANTY INCLUDES LASER
Download spec sheet Have A Question?

Materials

Non metals

Metals

Metals

WARRANTY

 

30 DAY-MONEY BACK GUARANTEE


Any feelings of skepticism you might have about investing in a new laser machine is completely normal! This is why BOSS LASER makes every effort to absorb as much risk as possible so you’re free to make a good decision. We want to make it easy for you to prove that our laser systems are quality machines backed by quality support.

We want you as our customer to be 100% satisfied. BOSS LASER guarantees you a 30-Day Return window (beginning the date of receipt) to evaluate your purchase. Click here for details.

 

2 YEAR LIMITED WARRANTY


BOSS LASER warrants its products and parts against defects in materials or workmanship for two (2) years from the original date of receipt. Click here for details.

 

VIEW FULL WARRANTY

Build machine

  • Laser Power
  • ACCESSORIES
  • SETUP OPTIONS
  • WARRANTY
  • Summary

Laser Power

Step 1 of 5

ACCESSORIES

Step 2 of 5

FIBER COOLING SYSTEMS

SETUP OPTIONS

Step 3 of 5

SET UP OPTIONS

WARRANTY

Step 4 of 5

Summary

Step 5 of 5

Model

Boss Laser 6012-EXT Front Closed - Fiber Metal Laser Cutter

BOSS FC-6012 EXT Fiber Laser Cutting Machine

1KW - IPG Fiber Power Upgrade

ACCESSORIES

  • FIBER COOLING SYSTEMS : Fiber Laser Chiller 1000 (1KW POWER)

SETUP OPTIONS

  • SET UP OPTIONS : 3 Day Onsite Training - Included

WARRANTY

  • 2 Year Limited Warranty (1 Year for Laser)
Boss Laser 6012-EXT Front Closed - Fiber Metal Laser Cutter

Call about our price match guarantee

Customer Reviews

Jackie
Jackie
2022-09-25
Ken was an absolute pleasure to talk to at Boss Laser. He provided assistance on our laser questions, a detailed demo, and shared a wealth of knowledge on engraving projects for our business, as well as recommendations for the next we would need to upgrade to for taking on bigger projects. Thank you, Ken!
Herbert Skerjanz
Herbert Skerjanz
2022-09-22
Darrius did a great job training us on the AccuCut. We had no experience at all going in and now feel very comfortable to utilize this great machine. Thanks a lot. Herbert
Hector Navarro
Hector Navarro
2022-09-19
Went in for a demo of their fiber laser a few weeks ago and was very impressed with the facility. Ken did a great job and answered all my questions! Hoping to be the proud owner of a Boss laser system very soon.
Aaron Lynn
Aaron Lynn
2022-09-16
Bosslaser has helped solve another issue in a very timely manor. I have yet to be let down by tech support. This is a great company with great customer service. Kyle, thank you for helping me with my cw 5200 water chiller.
Rita Kirkeby
Rita Kirkeby
2022-09-13
Charley was very patient and helped us resolve our engraving issue. He directed us through all steps to make sure we got our problem resolved in the same call. Great customer service. Thank you Charley!
Gerardo Villa
Gerardo Villa
2022-09-03
Robert was very knowledgeable and was able to talk thru the problem with ease
Dalcomm Tech LLC
Dalcomm Tech LLC
2022-09-02
Josh from Tech Support solved my tech issues with laser in one go. Knowledgeable and able to explain how to achieve the desired results with the laser. Thank you Josh!
Zachary Crear
Zachary Crear
2022-09-01
Tech support takes a couple days for a call back but once I got the call Kyle was great. We figured out it was an iD10T issue on my side and we were up an running in no time!
Peter Botelho
Peter Botelho
2022-08-31
Great training/demo. Ken took the time to show and explain exactly what we need. Our questions were all answered. We're now awaiting our delivery of our new BossLaser. Great Experience,